Flames of War – Page 12 – lighteffect.net

June 12, 2011

Operation “Get Cracking” Pt 2

Well I finished two test solders/figures.
You will notice this is a habit I have started now when prepping to to do a production line of figures… I suggest this to anyone thinking of painting a platoon or more of figs… paint a couple from start to finish and get the process right and change things.

This one was good.. I changed my usual order in which the flesh gets painted. I do however have to change my formula for the dark or ink wash. I’m still getting bath rings forming on my wash. Dish wash soap doesn’t seem to help. I’m thinking the magic wash is going to have to be tried again.. although I will need to buy some “Klear floor” polish first.

So… here is the first wash over the spray coat of desert yellow. This is a pretty dark wash of Khaki by Tamiya liberally applied over

so here is a comparison photo of the finish

I then jumped ahead and painted boots and wood, webbing’s (khaki), helmet (olive drab), elbow and knee knee patches and bags (olive green) and flesh, I then fished the guns and binoculars in black.
The black wash followed (which didn’t smooth very well.

here is the eye candy..

So the result is that the was darkens the base colour too much over all and needs a wash of almost equal colour.. but tinted so that the shadow will sit in the low spots. Of course a dry brush would solve this.. but I’m hoping to avoid it.

June 11, 2011

Operation “Get Cracking!” – US airbourne

It took more than 2 years for the US to train their crack airborne Para troops for WWII.
I however want more for the up coming August offensive…

So I have done some research on painting US WWII airborne and apparently they had two uniforms..the 1942 and the1943.

The 1943 is defiantly more olive drab or dark green and I decided not to go for this but adopted the 1942 with the very light tan colored uniform.

Unfortunately there is no decent color from Tamiya paints that represents the uniform. So I decided to wing -it with colors and expect some variation any way in the final shade.

I have decided to use dunkelgelb or sand yellow… I will use some tinted shades.. much like inks to get the desired effect.

Here are some nice photos of what is desired
This shows the 1943 uniform in comparison… which is very green.

This beautiful figure is the basis of what I am trying to achieve.

On to business.

I have decided to use airbrush and washes/inks to make speed with this job. The desired finish is table top standard.. not display.
Because of the overall color scheme this is much more achievable as the trousers and blouse are all the same color.

Step one:
I have my figures glued to card strip and metal primed already. I just take the trusty snips and cut them to strips of troops.

US airborne glued to cad and metal primed

Cut

Step two:
Assemble my work space… here I have my airbrush, paints, pots and all the other necessaries to air brush.

Step three:

I have mixed Tamiya XF-60 or dunkelgelb with a considerable amount of; Alcohol thinner 100% (ideally 90% works better), Liquifying agent, water, and a tiny amount of retardant.

The mix is very watery. If sprayed at too close a distance it will bead like water on the model. at the right distance it mists the model as a first coat. Because it has so much alcohol ad water in it, it dries real fast. Which means a second coat in about three of four minutes when your on a second cup of paint adheres beautifully.

And that’s is it so far… here are finished results today.

Now I will be brush painting next.

May 30, 2011August 7, 2011

Firestorm Market Garden Campaign Modifications

After having my first ideas pooh poohed somewhat severely enough to invoke the fetal position again .. I have managed a complete and utter re write from the ground up… incorporating some basics but essentially a whole new set of ideas.

Firestorm Market Garden campaign – Modified

(Bump for August)